ZED-F9P RTK GNSS SMART ANTENNA MODULE WITH UART/SPI, RFI PROTECTION AND SMA HELIX ANTENNA. BLACK PLASTIC CASE.
- 1 UART/SPI port (6-pin JST connector and 10cm cable included)
- On board low noise 3.3 V voltage regulator
- Time pulse LED, Power LED, RTK LED
- Flash memory for firmware upgrade and settings inside in the module (can save settings without battery)
- u-center u-blox Evaluation Service
OVERVIEW
(with UART/SPI and black plastic case) ZED-F9P four RTK GNSS Smart Antenna module and SMA antenna connectors in IP54 black plastic case for your UAV systems, Robots, RC, FPV or other projects. Base or Rover operation. Multi-band receiver delivers centimeter-level accuracy in seconds. Ultra small and light. Designed to use together with recommended Helix antenna.
The ZED-F9P positioning module features the new u-blox F9 receiver platform, which provides multi-band GNSS to high volume industrial applications in a compact form factor. ZED-F9P is a multi-band GNSS module with integrated u-blox multi-band RTK technology for centimeter-level accuracy. The module enables precise navigation and automation of moving industrial machinery by means of a small, surface mounted module.
The ZED-F9P module is designed for easy integration and low design-in costs with minimal e-BOM. It is well-suited for mass market adoption, thanks to its small package size, light weight, and small power consumption. ZED-F9P ensures the security of positioning and navigation information by using secure interfaces and advanced jamming and spoofing detection technologies.
ZED-F9P offers support for a range of correction services allowing each application to optimize performance according to the application’s individual need. ZED-F9P comes with built-in support for standard RTCM corrections, supporting centimeter-level navigation from local base stations or from virtual reference stations (VRS) in a Network RTK setup. The module can be upgraded to support future SSR-type correction services suitable for mass market penetration.
- 1 UART/SPI port (6-pin JST connector and 10cm cable included)
- On board low noise 3.3 V voltage regulator
- Time pulse LED, Power LED, RTK LED
- Flash memory for firmware upgrade and settings inside in the module (can save settings without battery)
- u-center u-blox Evaluation Service
- Supercapacitor for HOT module start
- Dimensions: 45x12 mm
- Weight: 18 gr.
- Fully assembled and ready to use
- Magnetic mount with waterproof 3M double sided tape
- Waterproof 3M double sided tape for mounting